酸性废水中As(Ⅲ)、Cu(Ⅱ)与铁粉的反应行为

在Fe-As(Ⅲ)-Cu(Ⅱ)-H₂O体系中, 研究了酸性废水中As(Ⅲ)、Cu(Ⅱ)与金属铁粉的反应行为, 考察了反应过程中As在气、液、固三相中的分配比。结果表明, As(Ⅲ)和Cu(Ⅱ)离子被Fe还原为单质As和Cu后, As、Cu进一步结合成Cu₅As₂等金属间化合物, 从而促进As(Ⅲ)沉淀反应的发生, 且无AsH3生成。在反应时间40min、铁粉过量系数1.2、溶液初始pH=0.0、温度40 ℃、Cu/As摩尔比1.0条件下, As在气、液、固三相中的分配比分别为0、20.7%和79.3%, 沉砷率为79.3%。     

一种新型随钻轨迹仪的研制

针对现有随钻轨迹仪工作时间短、需人工同步、"数钻杆"记录钻孔深度不足等问题,采用深度实时测量技术、电源智能管理技术和数据自动同步与成图等关键技术,研制了新型随钻轨迹仪。该仪器由直线位移传感器、压力传感器、霍尔开关等组成,具有钻孔深度自动测量、电源智能管理、测量数据与深度自动匹配等功能。试验结果表明:新型钻孔轨迹仪工作稳定可靠、无需人工干预、工作时间长、生产效率高。     

基于VMD和BSA-KELM的高陡边坡位移预测模型研究

边坡位移的时间序列曲线存在复杂的非线性特性,传统的预测模型精度不足以满足预测要求。为此提出了基于变分模态分解的鸟群优化-核极限学习机的预测模型,并用于河北省某水泥厂的边坡位移预测。该方法首先采用VMD把边坡位移序列分解为一系列的有限带宽的子序列,再对各子序列分别采用相空间重构并用核极限学习机预测,采用鸟群算法优化相空间重构的嵌入维度和KELM中惩罚系数和核参数三个数值,以取得最优预测模型。最后将各个子序列预测值叠加,得到边坡位移的最终预测值。结果表明：和KELM、BSA-KELM、EEMD-BSA-KELM模型相比,基于VMD的BSA-KELM预测精度更高,为边坡位移的预测提供一种有效的方法。     

第八届全国工程爆破学术会议征文通知

介绍了在复杂环境中采用控制爆破技术拆除2组钢筋混凝土结构楼梯扶手,论述了工程方案参数设计及主要安全措施。拟拆除扶手为钢筋混凝土墙体,厚30cm,墙体布置2层钢筋,纵向钢筋为Φ15mm,间距15cm,横向钢筋为Φ12mm,间距20cm,因墙体较薄,钢筋密集,沿墙面水平向钻孔,施工难度大,采取剔除墙端部箍筋,沿墙体垂直钻孔,孔间距30cm,采用不耦合装药结构。扶手墙体不规则,需分区段确定孔深,由于扶手底座混凝土需要保护,孔底填充缓冲材料,采用非电导爆管雷管逐段孔外接力起爆。利用炮被(橡胶轮胎制作)进行覆盖防护,使爆破飞石控制在被爆体周围2³m范围内,同时在距被爆体周围2m范围搭设防护排架,铺设竹席、棉被和草帘等进行隔离防护,确保爆破飞散物不飞出防护层外,爆破后达到预期的爆破效果。     

新疆油气行业碳捕集、利用与封存技术发展路线分析

为了缓解新疆CO₂气体控排压力，扭转严峻的节能减排形势，做好能源行业领域的减排技术发展规划，基于现阶段较为成熟的CCUS技术，探讨了对CO₂捕集、运输、利用和封存几个环节不同的方案，针对性的提出现阶段新疆油气行业可行的CCUS技术方案。结果表明:短期内新疆地区以化石能源消费的结构不会发生较大变化，限制碳排放量可从开展CCUS技术入手；规划合适的碳源是开展CCUS技术的重要前提，在条件允许的情况下，对排碳设备（燃烧器）进行改造对提高捕集效率有正相关性；CO₂运输方式的合理性直接影响了CCUS技术产业布局和使用效率；推广和开拓CO₂的使用方式和途径，对响应国家低碳环保政策、调整新疆能源产业结构有积极意义。     

Analysis of arbitrarily shaped planar cracks in three-dimensional isotropic hygrothermoelastic media

In the present article, a planar crack of arbitrary shape embedded in three-dimensional isotropic hygrothermoelastic media is investigated. Based on the general solutions and Hankel transform technique, the fundamental solutions for unit-point and extended displacement discontinuities (EDD; including the displacement discontinuities, moisture concentration discontinuity, and the temperature discontinuity) are derived. The EDD boundary integral equations for an arbitrarily shaped, planar crack in the hygrothermoelastic medium are established in terms of the EDD. Utilizing the boundary integral equation method, the singularities of near-crack front fields are analyzed, and the stress, moisture flux, and heat flux intensity factors are all derived in terms of the EDD. As a special case, the analytical solution for a penny-shaped crack under uniform combined loadings is presented. The EDD boundary element method is proposed for numerical simulation. The numerical result for a penny-shaped crack subjected to uniform mechanical–moisture–thermal loading is compared with the analytical solution to verify the correctness of the proposed method. Two coplanar elliptical cracks subjected to combined loadings are simulated as an application, and the influences of applied loadings and the ellipticity ratio are discussed.     

考虑水平（切向）位移影响的垫层孔隙内土工膜顶胀

The common cushion layer used in the geomembrane face rockfill dam is made of granular materials such as gravel and non-fine concrete where bulge deformation or failure of geomembrane is very likely to occur in its surface holes. The curve intersection method based on the thin film theory is the common method used to analyze the bulge deformation of the geomembrane in the surface holes of cushion layer. However, it is inaccurate due to the neglection of horizontal (tangential) displacement of the geomembrane. Based on the FEM theory, a new method is proposed, which takes the horizontal (tangential) displacement of geomembrane into consideration, and is validated by the bulge tests on the geomembrane in a circular hole. The deformations and strains of the geomembrane in different shapes of holes are analyzed by this method, and different strain distributions and failure modes are obtained. The curve intersection method is also used to compare with the new method under the same condition. It is indicated that there is less difference in the deformation and average strain of the geomembrane when the water pressure is low. However, when the water pressure is relatively high, the influences of horizontal (tangential) displacement of the geomembrane on its strain should not be neglected.     

基于集员未知输入观测器的风力机桨距执行器故障诊断

风力机一般放置在恶劣的环境中,其桨距执行器极易出现故障。文中针对一类含有未知但有界干扰和噪声的风力机系统的桨距执行器故障问题,设计了集员未知输入观测器对桨距的执行器故障进行检测并分离。采用气动机理和现代辨识原理建立风力机系统模型,通过优化未知输入观测器设计对系统中的干扰解耦,基于中心对称多胞体估计不考虑故障时残差的区间包络,并将其作为残差估计的上下动态阈值,实现状态估计。在上述基础上提出了利用一组集员未知输入观测器进行故障诊断的策略。仿真结果表明,在实验过程中,文中所设计的集员未知输入观测器准确地诊断出了风力机桨距执行器的3阶和5阶线性系统在发生突变故障和缓慢时变故障的时间和位置,证明了所提故障诊断策略的有效性。     

STUDY ON SIMULATION EXPERIMENT OF EQUIVALENT MATERIAL APPLIED IN COAL MINE

IntreductionSimulationexperimentofequivalentmaterialaboutundergroundpressurewasfoundedbYr.H.KySHeuoB(Russian)inthe194o's,andwasintroducedintoourcoalschoolsandresearchinstitutionsinthe196o's.Ithasbeenanexperimentmethodwidelyappliedinlargeengineeringproblemresearchsincethe198o's.Itsadvantageisthatitcandirectlyperceiverockstratafractureandmovementbymineralextraction,thatitisconvenienttodirectlysurveyover1yingrockstratadisplacementandloadtransfer,andobserveitsmovementandbalancelaw.Themoldinclud…